Turd Flinging Monkey @[email protected]

STREAMING NOW

TFM Website: https://tee.fm/
Morning Constitutional Article Links: https://tee.fm/morning-constitutional-articles/
Stream Links:
Entropy: https://entropystream.live/TFMonkey
Rumble: https://rumble.com/user/TFMonkey
MGTOW.TV: https://www.mgtow.tv/live?u=TFMonkey
Odysee: https://odysee.com/@TurdFlingingMonkey:1/TFMShowLIVEOdyseeStream:7
DLive: https://dlive.tv/TFMonkey

@Mr_Mister It looks like they are only upscaling the graphics, which is a shame. The gameplay was very clunky and didn't hold up well even for its time. I would have loved a remake rather than a simply graphical upgrade, but I get that they didn't want to take expensive risks on such an old franchise.

@assblast6969 who hurt you?

@qwerty

@SlicerDicer I just use a cheap <$200 printer. If my thermistor broke I would probably just buy a whole new one as an upgrade because FDM printers have come a long way in the last few years, but I don't want to buy a new printer while the one I have works fine.

I just recognized the flaws in the print as being indicative of the temp being low. I'm not much of a printer hobbyist. I just print stuff for tabletop RPGs and games.

@SlicerDicer good to hear that it's working. The only other thing you can do if raising the temp doesn't work is to slow down the print.

@SlicerDicer print a benchie boat and that will help you dial in your settings.

general the filament tells you the temps you should have the printer set to on the label, but sometimes you have to increase the temps by 5-10 degrees if things aren't sticking correctly.

@SlicerDicer Oh, I thought you meant the speckles on the PLA. If you're referring to the layers not adhering smoothly, it's because your temp is too low. you probably changed filament brands and didn't run a test print. It looks like your temp needs to be increased by 5-10 degrees, which should clear up those cracks between the layers.

@SlicerDicer Are you using glue to get the PLA to stick to the print bed?

I prefer PETG personally. You don't need glue and it's less brittle.

The TFM Show: September 21st, 2024

Rumble: https://rumble.com/v5fw1lx-the-tfm-show-september-21st-2024.html
MGTOW.TV: https://www.mgtow.tv/watch/the-tfm-show-september-21st-2024\_wvbzomR2kvteYV4.html
Bitchute: https://old.bitchute.com/video/rkQTemy7Apbb/
Odysee: https://odysee.com/@TurdFlingingMonkey:1/2024-09-21-19-01-05:2
PeerTube: website is down

@mangeurdenuage https://philgsblog.wordpress.com/2015/06/12/the-useless-tree-by-chuang-tzu-translated-by-thomas-merton/

@DireGoy @mutageno2 @suquili that's hait speech.

@Wopu It's all about the suspension of disbelief. If you are used to texting/chatting with girls, then texting/chatting with an AI is enough. If you're used to calling or having video chats with girls, then you will need voice and/or video to enhance that emersion.

Luckily, I'm used to texting/chatting so I don't need voice or video. Although, I would like a physical robot I can talk to in person someday.

@RegalBeagle nobody outside the Taliban wants to address the real problem. BRICS is still an improvement even if it does nothing about the birth rates.

@ArmchairEconomist01 do you believe that disobedience to unjust laws is moral while also believing that the government should turn any infraction into a death sentence?

@LukeAlmighty there's more than one way to skin a dick, turn it inside out, and sew it to your colon.

I wonder if any trannies have preserved their removed penises and turned them into a dilators so they could fuck themselves in their frankenpussies with their own dicks.