Turd Flinging Monkey @[email protected]

@weking I fucking hate "classmates"

@Terry it worked when they destroyed hospitals, schools, and refugee camps, so why would commercial airliners be different?

@Mr_Mister yes, thank you. wording is hard.

@VooDooMedic sounds like you have to moonlight as a comedian.

@Fiddle dirt doesn't show up as obviously on brown things.

@fatepony let's ask HP Lovecraft's cat.

The Morning Constitutional: September 18th, 2024

Rumble: https://rumble.com/v5gbzwl-the-morning-constitutional-september-18th-2024.html
MGTOW.TV: https://www.mgtow.tv/watch/the-morning-constitutional-september-18th-2024\_mtXCTo7MukXkOF4.html
Bitchute: https://old.bitchute.com/video/DykrMdKMDh6m/
Odysee: https://odysee.com/@TurdFlingingMonkey:1/2024-09-18-08-00-52:d
PeerTube: website is down

STREAMING NOW

TFM Website: https://tee.fm/
Morning Constitutional Article Links: https://tee.fm/morning-constitutional-articles/
Stream Links:
Entropy: https://entropystream.live/TFMonkey
Rumble: https://rumble.com/user/TFMonkey
MGTOW.TV: https://www.mgtow.tv/live?u=TFMonkey
Odysee: https://odysee.com/@TurdFlingingMonkey:1/TFMShowLIVEOdyseeStream:7
DLive: https://dlive.tv/TFMonkey

@Mr_Mister It looks like they are only upscaling the graphics, which is a shame. The gameplay was very clunky and didn't hold up well even for its time. I would have loved a remake rather than a simply graphical upgrade, but I get that they didn't want to take expensive risks on such an old franchise.

@assblast6969 who hurt you?

@qwerty

@SlicerDicer I just use a cheap <$200 printer. If my thermistor broke I would probably just buy a whole new one as an upgrade because FDM printers have come a long way in the last few years, but I don't want to buy a new printer while the one I have works fine.

I just recognized the flaws in the print as being indicative of the temp being low. I'm not much of a printer hobbyist. I just print stuff for tabletop RPGs and games.

@SlicerDicer good to hear that it's working. The only other thing you can do if raising the temp doesn't work is to slow down the print.

@SlicerDicer print a benchie boat and that will help you dial in your settings.

general the filament tells you the temps you should have the printer set to on the label, but sometimes you have to increase the temps by 5-10 degrees if things aren't sticking correctly.

@SlicerDicer Oh, I thought you meant the speckles on the PLA. If you're referring to the layers not adhering smoothly, it's because your temp is too low. you probably changed filament brands and didn't run a test print. It looks like your temp needs to be increased by 5-10 degrees, which should clear up those cracks between the layers.

@SlicerDicer Are you using glue to get the PLA to stick to the print bed?

I prefer PETG personally. You don't need glue and it's less brittle.